The FAAC 400?CBAC?EG (Long) Operator Only 115?V (Part No.?104202125) is a heavy-duty hydraulic swing gate operator specifically designed for high-demand environments such as apartments, subdivisions, commercial sites, and industrial facilities. Ideal for large and ornate gates, this operator offers quiet, reliable performance devoid of pinch points, and includes hydraulic locking in both open and closed positions, as well as a key-protected manual release for emergency situations like power failure
This extended-geometry model supports gate leaves up to 18?ft (5.5?m) and 1,500?lb (680?kg), with a thrust force of 1,045?lbf (465?daN).
Safe and Secure Operation: Engineered with a hydraulic bypass valve to prevent entrapment and a key-protected manual release for emergency gate operation during power loss. The hydraulic locking mechanism ensures the gate stays securely in open and/or closed positions.The hydraulic design eliminates pinch points, offering superior safety compared to traditional operators
Mount the unit: Attach the operator to the gate leaf, ensuring correct alignment and secure installation.
Connect control panel (if part of existing kit): Integrate power, safety inputs, and limit switches to the 455D control board (if used).
Manual release: Confirm the key-operated manual release is functional to enable manual gate movement during emergencies.
Install positive stops: Ensure mechanical stops are placed at both open and closed positions to avoid overtravel (required by UL?325).
Functional testing: Open and close cycles should be smooth with visible hydraulic locking; observe cycles-per-hour performance under ambient conditions.
Upgrade to dual (bi-parting) systems: Use this operator as a secondary in master/slave configurations for dual-gate setups.
Use positive stops: Mandatory for extended-geometry gates to prevent structural or operator damage.
Consider Arctic oil for extreme climates: While this version includes standard oil, FAAC offers Arctic oil alternatives for performance in freezing temperatures.
Follow UL?325 guidelines: Comply with safety standards by including photoelectric sensors and proper stop mechanisms
