FAAC 7095035 Piston Rod Packing 402/422/610

Safety (Safe)

An authentic OEM component, the FAAC Piston Rod Packing offers a high-integrity seal to prevent hydraulic fluid leaks, reducing risks of malfunctions or system failures. Proper sealing helps maintain the actuator’s safe and efficient operation, ensuring long-term system reliability.

 Installation Instructions

1. Remove the actuator cylinder from the FAAC models 402, 422, or 610 and drain hydraulic fluid if required.

2. Dismantle the piston assembly carefully to access the old packing.

3. Remove the worn packing, taking care not to damage the piston rod or bore.

4. Clean the rod and housing thoroughly before installation.

5. Install the new P/N 7095035 packing, ensuring a precise fit.

6. Reassemble the piston, reinstall the cylinder, and refill or replace the hydraulic fluid per FAAC guidelines.

7. Test the actuator for proper operation and verify there are no leaks.

Recommendation

For reliable maintenance and optimal performance of your FAAC hydraulic gate actuators, replace the piston rod packing during routine service intervals. The P/N 7095035 is the recommended OEM seal for models 402, 422, and 610—ideal for professional gate automation systems where dependable sealing and long-term durability are critical.