FAAC 63003452 B680H Control Board E680

E680S Control Board For B680 Automatic Vehicle Barriers - FAAC 63003452

The E680 Control Board by FAAC comes equipped with two integrated loop detectors and is compatible with all 5-pin receivers and all photocells (non BUS included).

Features and Specifications:

• Control Board Model: E680S
• Power Supply Voltage: 115VAC 50/60 Hz
• Standby Power: 7 W
• Motor Max Power: 240 W
• Max. Accessories Load: 800 mA
• Accessories Power Supply: 24V
• Programming: 3 Keys (+, -, F) and Display, 1 Automatic Set-Up Key
• Operating logic Automatic, Automatic 1, Semi-automatic, Parking, Parking-Automatic, Condominium, Condominium-Automatic, Manned, Remote, Custom
• Programmable Functions: Logic, Pause Time, Opening/Closing Power, Opening/Closing Speed, Loop 1 and 2, Pre-Flashing, Work Time, Obstacle Detection Sensitivity, Cycle Counter for Service, LED Output, Failsafe Output, Status Output, Service Request, Beam LED Lighting Output
• Work Time: Programmable (From 0 to 4.1 min)
• Pause Time: Programmable (From 0 to 4.1 min)
• Thrust Power: Programmable on 50 levels
• Speed Adjustment: Programmable on 50 levels
• Terminal Board Inputs: Loop 1, Loop 2, Open, Close, Closing Safety Devices, Stop, Emergency, Power supply 36V, Battery XBAT, BUS 2easy
• Terminal Board Outputs: Flashing Lamp 24V, Brushless Motor, Accessories Power Supply 24V , 4 Programmable Outputs of Which One With Relay
• Rapid Connector: Encoder, Beam Release Sensor, Integrated Flashing Traffic Light, USB (For Updating Firmware), 5-Pin Minidec, Decoder, RP/RP2 Receiver.
• Integrated Detector: 2 Independent Channels: Real-Time Self-Calibration, Sensitivity Independent of Loop Geometry, Loop Work Frequency Adjustment, Occupied Loop Message With LED Display, Loop Status Can Be Directed on Programmable Outputs
• Protection Fuses: 4 Self-Resetting
• Operating Ambient Temperature: -4 Degree F To +131 Degree F

This Product Was Formally Referred To As FAAC Part 63000128, FAAC Part 63000714