The FAAC 400?CBAC?EG Extended-Geometry Basic Single Operator Kit – 115?V (Part No.?10420212.5) is a high-performance hydraulic swing gate opener engineered for demanding residential, commercial, and industrial environments. Its long-arm (extended geometry) design makes it ideal for master/slave setups or replacing existing FAAC gate systems.
Kit includes:
One 400 CBAC EG hydraulic operator
One 455D 115?V control panel
One 14"?×?16" pre-wired UL-listed fiberglass enclosure
One 433?RC plug-in receiver
Two XT4 4-channel 433?RC transmitters
Safe and secure operation: The hydraulic bypass valve ensures anti-entrapment protection, and the included key-operated manual release allows manual gate operation during power outages. Hydraulic locking enhances security by holding the gate firmly in place—open or closed. The extended geometry design also minimizes pinch-point hazards.
Install the enclosure: Mount the 14" × 16" pre-wired enclosure on a stable, accessible surface near the gate.
Mount the operator: Securely attach the 400 CBAC EG to the gate using the provided hardware.
Wire the control panel: Connect the 115?V power, receiver, safety devices (e.g., photocell), and any accessories via the 455D control board.
Program the receiver: Insert the 433?RC receiver and synchronize the XT4 transmitters.
Set mechanical stops: Install positive stops to define open/closed positions per UL requirements.
Test the manual release: Verify the key-operated manual override functions as expected.
Function test: Run multiple opening and closing cycles to validate smooth, quiet operation and secure hydraulic locking.
Ensure UL325 compliance: Install a monitored photoelectric sensor, required in the U.S. since February 2016.
Upgrade to dual-gate systems: Use this kit as the primary unit in master/slave (bi-parting) configurations.
Include mechanical stops: Essential for protecting gate and operator integrity.Match hydraulic oil to climate: For cold environments, consider upgrading to Arctic oil for optimal performance.
