Recommended for routine maintenance and fluid replacement in FAAC 750 pump systems. Use this high-quality hydraulic oil to maintain smooth operation, optimal pressure control, and prolong the life of hydraulic components in automatic gate operators.
Safety first: Turn off and disconnect all power to the gate operator.
Position pump: Access the FAAC 750 pump in the operator assembly per manufacturer guidelines.
Drain old fluid: Carefully drain existing hydraulic fluid into a suitable container.
Inspect components: Check seals and hoses for wear or damage before refilling.
Fill with FAAC oil: Pour the FAAC 107725.5 750 CBAC 115 V .75 Lt Hydraulic Oil into the reservoir to the specified level.
Check seals: Ensure reservoir cap and seals are secure.
Test system: Reconnect power and run a few cycles to verify smooth operation and no leaks.
Always disconnect power before servicing hydraulic systems.
Wear protective eyewear and gloves when handling fluids.
Avoid contact with skin—wash immediately if exposure occurs.
Dispose of old fluid according to local environmental regulations.
Do not mix with incompatible fluids—use only FAAC-recommended hydraulic oil.
Inspect for leaks after refilling to prevent environmental contamination and maintain performance.
