The FAAC S418 24V Electro-Mechanical Swing Gate Operator (Model 104301.5) delivers high-performance automation for residential swing-leaf gates. This low-voltage, 24VDC system offers continuous-duty operation, making it ideal for frequent use. Fueled by a 35W motor and drawing only 1.5A, the S418 applies up to 180daN (approximately 404lbf) of thrust to gates up to 12ft (3.7m) or 500lb (227kg). Thanks to integrated opening and closing mechanical stops, adjustable speed settings, and a robust E024U control board with virtual encoder and reverse-on-contact safety, installation is streamlined and safe. Multi-position, non-welded brackets make fitting flexible and efficient. The unit includes a manual release lever and built-in battery backup to guarantee reliable operation—even during power outages. Supported operating temperature ranges from –20°C to +55°C (–4°F to 131°F), and its solid IP54-rated construction ensures outdoor durability. Suitable for gate leaves up to 2.3m (7.5ft) or up to 2.7m (8.9ft) when using an electric lock.
Operates at safe low voltage (24VDC) with reduced heat—supports continuous-duty operation.
Built-in mechanical stops and virtual encoder control with reverse-on-contact ensure compliance with safety standards.
IP54-rated for outdoor durability. Manual release lever and optional battery backup add reliability during power loss
Secure the multi-position bracket to the gate pillar—no welding required.
Mount the S418 arm and control enclosure (E024U) using included hardware per installation guide.
Connect power: 24VDC actuator wiring and standard 110–120VAC to controller.
Program the stroke (up to 350?mm) and speed settings via push-button setup on the E024U board.
Optional: Install electric lock for gate leaves over 2.3m
Test obstacle detection—gate should reverse upon contact.
Connect battery backup and program remotes as required.
Finalize by testing cycles and ensuring smooth operation.
Always pair with monitored safety photocells to comply with UL325 regulation in the U.S.
Maintain unobstructed path and clear debris around mechanical stops.
Perform regular functional tests for safety operation.
Consider dual kit setup for bi-parting gates—easy pairing and synchronized operation.
