Kit includes:
400?CBACR rapid hydraulic actuator
455D control board (230?V)
14?×16? UL–listed, pre-wired fiberglass enclosure
433?RC plug-in receiver
Two XT4 4-channel 433?RC transmitters
Technical specifications:
Input voltage: 220/230/240?VAC (1?f, 60?Hz)
Power: 220?W; Current: 1?A; Motor: 1,400?rpm; Capacitor: 25?µF
Operating temperature: –36?°C to +75?°C (–33?°F to +165?°F)
Thermal protection at 120?°C (248?°F); IP55 rating
Dimensions: 40.5? × 4.4? × 3.3? (1,031?×?113?×?85?mm)
Thrust: 1,045?lbf (465?daN); Pump flow: 1.5?L/min; Rod speed: 0.6?in/s; Stroke: 10.25?in
Max gate: 12?ft / 900?lb; Cycles per hour: 80
Safe and Secure Operation: The integrated hydraulic bypass valve offers entrapment protection without pinch points. Hydraulic locking ensures the gate remains secure when open or closed, and the key-protected manual release allows manual access during outages. Note: UL325 now requires a monitored photoelectric sensor for the unit to operate in the U.S
Mount the arm using included hardware, confirming proper alignment.
Integrate wiring into an existing kit or control panel (not included).
Install positive stops at end positions (open/closed) to meet safety standards.
Test manual release function with power turned off to ensure smooth emergency access.
Perform operational tests to verify rapid, smooth action and firm hydraulic locking.
Use as part of a bi-parting setup: Combine with a single gate kit to create a master/secondary configuration.
Ensure UL325 Compliance: Incorporate monitored safety sensors to meet U.S. requirements after February 2016.
Include mechanical stops: Essential for system longevity and safety.
Regular maintenance: Check hydraulic fluid and components periodically for optimal performance.
