FAAC 400 CBAC Hydraulic Linear Arm Swing Gate Operator Kit – 115V (Part No.10420112.5, Standard Basic Single Kit) is a robust hydraulic operator suitable for a wide range of settings—residential, commercial, industrial—delivering quiet, durable operation with hydraulic locking and manual release protection. It supports swing gates up to 16ft (4.9m) and 1,300lb (589kg) per leaf
Kit includes:
1 × 400 CBAC hydraulic operator
1 × 455D 115V control panel
1 × 14×16 pre-wired fiberglass enclosure
1 × 433RC plug-in radio receiver
2 × XT4 4-channel 433RC transmitters
Photobeam safety sensors included in some distributors (e.g., Gate Depot)
Mount enclosure: Install the 14? × 16? fiberglass enclosure on a stable foundation.
Install operator: Securely attach the 400 CBAC hydraulic unit to the gate leaf, ensuring proper alignment.
Wire control panel: Connect input power (115?VAC), safety devices, receiver, and any accessories to the 455D control panel.
Setup radio: Plug in the 433 RC receiver and program the XT4 transmitters.
Verify manual release: Confirm that the key-protected manual override works correctly for emergency gate release.
Install safety stops: Use positive stops at open/closed positions to protect the system .
Test operation: Run full open-close cycles to ensure smooth motion and correct locking functionality.
Install monitored photo-cells to comply with UL325 and enhance safety against obstructions. Some kits already include XP 30 photobeam sensors .
Use proper hydraulic oil. For extreme temperatures, consider requesting Arctic-grade fluid (part no.?1042011277.5) to ensure performance in cold environments
Include positive mechanical stops at both gate positions to deter over-travel.
Follow UL325 compliance when installing safety systems (photo-cells, loop detectors, etc.).
Safe and Secure Operation: Built-in hydraulic bypass valve offers anti-entrapment protection, and the key-protected manual release allows for manual operation during power failures. The hydraulic lock secures the gate in open and/or closed positions for added stability and safety
